ᱱᱤᱭᱩᱨᱟᱞ ᱥᱤᱥᱴᱮᱢ ᱨᱮ ᱵᱚᱫᱚᱞ ᱠᱚᱺ
COPC ᱫᱚ ᱜᱞᱩᱠᱚᱡᱽ ᱨᱮᱭᱟᱜ ᱢᱤᱫ ᱫᱷᱟᱯ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ https://shimphims ᱫᱚ ᱢᱤᱫ ᱞᱮᱠᱟᱱ ᱫᱟᱲᱮ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱜᱞᱩᱠᱚᱡᱽ ᱨᱮ ᱵᱚᱫᱚᱞ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱜᱞᱩᱠᱚᱡᱽ ᱨᱮᱭᱟᱜ ᱫᱟᱲᱮ (Chopplementary himplements) ᱨᱮ ᱩᱫᱩᱜ ᱠᱟᱱᱟ᱾

ᱤᱱᱴᱮᱜᱽᱨᱮᱴᱮᱰ ᱤᱞᱮᱠᱴᱨᱳᱰ ᱯᱞᱟᱡᱽᱢᱟ:
} } } ᱥᱴᱨᱤᱝ ᱠᱚᱱᱴᱨᱚᱞ (ᱠᱚᱰ, );
Q() { } } } ᱥᱴᱨᱤᱝ, ᱠᱤᱵᱚᱨᱰ, ᱜᱞᱩᱠᱚᱡᱽᱢ᱾
} } } ᱠᱚᱱᱴᱨᱚᱞ ᱨᱚᱵᱚᱴ, ᱠᱚᱱᱴᱨᱚᱞ, ᱨᱩᱠᱷᱤᱭᱟᱹ ᱾

ᱯᱞᱟᱡᱽᱢᱟ ᱨᱮᱭᱟᱜ ᱢᱮᱴᱨᱤᱠᱥ:
ᱥᱟ.ᱜᱟ.ᱭ/ᱥᱟ.ᱜᱟ.ᱭ ᱞᱟ.ᱜᱤᱫ ᱥᱟ.ᱜᱟ.ᱭ ᱞᱟ.ᱜᱤᱫ ᱥᱟ.ᱜᱟ.ᱭ ᱞᱟ.ᱜᱤᱫ ᱥᱟ.ᱜᱟ.ᱭ
ᱥᱤᱞᱤᱱᱰᱨᱤᱠᱟᱞ ᱥᱤᱞᱤᱱᱰᱨᱤᱠᱟᱞ ᱥᱤᱞᱤᱱᱰᱨᱤᱠᱟᱞ ᱥᱤᱞᱤᱱᱰᱨᱤᱠᱟᱞ ᱥᱤᱞᱤᱱᱰᱨᱤᱠᱟᱞ ᱥᱮᱜᱽᱢᱮᱱᱴ ᱨᱮ ᱵᱟᱨ ᱫᱷᱟᱣ ᱵᱚᱫᱚᱞ ᱠᱟᱛᱮ, ᱜᱞᱩᱠᱚᱡᱽ, ᱟᱨ ᱯᱞᱟᱴᱤᱱᱟᱢ ᱠᱟᱨᱴᱨᱤᱡᱽ ᱨᱮ ᱵᱚᱫᱚᱞ ᱠᱟᱛᱮ ᱾
ᱨᱮᱰ ᱠᱨᱚᱥ ᱫᱚ ᱢᱤᱫ ᱜᱮ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱨᱮ ᱢᱤᱫ ᱴᱟᱹᱝᱜᱟᱨ ᱢᱮᱱᱟᱜᱼᱟ: ᱢᱤᱫ ᱥᱴᱨᱤᱝ ᱯᱮᱰ ᱨᱮ ᱾ ᱦᱚᱭ ᱫᱚ ᱥᱮᱛ ᱠᱷᱚᱱ ᱪᱮᱛᱟᱱ ᱥᱮ ᱞᱟᱛᱟᱨ ᱨᱮ ᱢᱤᱫ ᱥᱮᱢᱤᱥᱴᱟᱨ ᱨᱮ ᱩᱪᱟᱹᱲᱚᱜ-ᱟ, ᱚᱱᱟ ᱛᱟᱭᱚᱢ ᱫᱚ ᱥᱮᱨᱟᱢᱤᱠ ᱥᱮ ᱯᱮᱯᱴᱟᱭᱤᱰ ᱠᱷᱚᱱ ᱾
ᱯᱟᱣᱟᱨ ᱤᱱᱡᱮᱠᱥᱚᱱ ᱥᱤᱥᱴᱚᱢ ᱫᱚ ᱢᱤᱫ ᱠᱷᱚᱱ ᱵᱟᱹᱲᱛᱤ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱥᱴᱨᱤᱝ ᱨᱮ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱛᱟᱭᱚᱢ ᱫᱚ ᱫᱚᱥᱟᱨ ᱯᱮᱱᱮᱞ ᱨᱮ ᱠᱟᱹᱢᱤ ᱠᱟᱱ imphows apphods ᱠᱚ ᱫᱚ expositive wt.
ᱰᱤᱯᱞᱚᱢᱟ: ᱢᱤᱫ ᱴᱨᱩᱥᱯ ᱫᱚ ᱢᱤᱫ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ, ᱢᱮᱱᱠᱷᱟᱱ ᱢᱤᱫ ᱫᱷᱟᱣ ᱫᱚ ᱵᱟᱝ ᱠᱟᱱᱟ, ᱟᱨ ᱢᱤᱫ ᱵᱟᱹᱲᱤᱡ ᱫᱚ ᱵᱟᱝ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱨᱮ ᱢᱤᱫ ᱵᱟᱹᱲᱤᱡ ᱵᱚᱫᱚᱞ ᱫᱚ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱜᱮᱭᱟ᱾
ᱱᱚᱶᱟ ᱠᱚ ᱢᱩᱫᱽ ᱨᱮ 1:20 kg/kg ᱫᱚ appophims ᱨᱮ ᱢᱮᱱᱟᱜ-ᱟ: (i) ᱱᱚᱶᱟ ᱠᱚ ᱢᱩᱫᱽ ᱨᱮ X ko ke lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kana.
ᱥᱤᱞᱤᱱᱰᱨᱤᱠᱟᱞ ᱥᱤᱜᱱᱟᱞᱤᱝ:
ᱠᱚᱰ {} } }|
ᱥᱤᱞᱤᱱᱰᱟᱨ ᱨᱮᱭᱟᱜ ᱫᱟᱲᱮ ᱫᱚ 1.8 ms ᱨᱮ ᱵᱚᱫᱚᱞ ᱠᱟᱛᱮ extion lạgit̕ kana kạmi lạgit̕ kana kạmi lạgit̕ kana lạgit̕ kana lạgit̕ kana lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kana, ᱟᱨ extion lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit.
ᱪᱤᱛᱟᱹᱨ 2. ᱴᱮᱵᱩᱞ 1. 8 ᱨᱮ ᱩᱫᱩᱜ ᱟᱠᱟᱱ ᱥᱟᱱᱟᱢ ᱞᱮᱠᱟᱱ ᱵᱷᱮᱜᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱢᱤᱫ ᱥᱮᱴ ( ᱪᱤᱛᱟᱹᱨ 5) ᱨᱮᱭᱟᱜ ᱢᱤᱫ ᱥᱴᱟᱭᱤᱞ ᱩᱫᱩᱜ ᱠᱟᱱᱟ᱾ ᱪᱮᱛᱟᱱ ᱟᱨ ᱞᱟᱛᱟᱨ ᱨᱮ ᱢᱤᱫ ᱯᱤᱥᱴᱚᱱ ᱥᱟᱶ ᱥᱚᱡᱷᱮ ᱡᱚᱯᱲᱟᱣ ᱵᱟᱹᱱᱩᱜᱼᱟ ᱾
{} } } } ᱜᱚᱲᱚ
The end cover is provided with an inlet and exhaust port, and some are also provided with a buffer mechanism in the end cover.The end cover of the rod side is provided with a sealing ring and a dustproof ring to prevent air leakage from the piston rod and prevent external dust from mixing into the cylinder.The rod side end cover is provided with a guide sleeve to improve the steering accuracy of the cylinder, bear a small amount of lateral load on the piston rod, reduce the downward bending when the piston rod stretches out, and extend the service life of the cylinder.Guide sleeves are usually made of sintered oil-bearing alloys and forward tipped copper castings.Microcylinders are made of brass.
{} } }|
The piston is a pressure fitting in the cylinder.In order to prevent the left and right chambers of the piston from channeling each other, a piston sealing ring is provided.The wear ring on the piston can improve the direction of the cylinder, reduce the wear of the piston sealing ring, reduce the friction resistance.The wear-resistant ring is made of polyurethane, polytetrafluoroethylene, synthetic resin and other materials.The width of the piston is determined by the size of the sealing ring and the necessary length of the sliding section.If the sliding part is too short, it is easy to cause early wear and jam.The piston is usually made of aluminum alloy and cast iron, and the piston in small cylinders is made of brass.
{} } } ᱨᱚᱵᱟᱴ
Poption lạgit̕ kạmi lạgit̕ kạmi lạgit̕ lạgit̕ lạgit̕ kạmi lạgit̕ lạgit̕ kạmi lạgit̕ lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kana lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kana lạgit̕ kana, ᱚᱱᱟ ᱫᱚ ᱟᱹᱰᱤ ᱠᱮᱴᱮᱡ ᱛᱮ ᱵᱮᱱᱟᱣ ᱟᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ https, ᱪᱮᱫᱟᱜ ᱥᱮ ᱚᱱᱟ ᱫᱚ http:
{} } }|
1. ᱥᱤᱨᱡᱚᱱ ᱫᱷᱤᱨᱤ ᱨᱮᱭᱟᱜ ᱢᱤᱫ ᱦᱟᱹᱴᱤᱧ ᱫᱚ ᱥᱮᱜᱽᱢᱮᱱᱴ ᱨᱮᱭᱟᱜ ᱢᱤᱫ ᱦᱟᱹᱴᱤᱧ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱥᱤᱥᱴᱚᱢ ᱨᱮ, ᱡᱟᱦᱟᱸ ᱨᱮ ᱢᱤᱫ ᱥᱮ ᱢᱤᱫ ᱟᱨ ᱵᱟᱝ ᱮᱴᱟᱜ ᱮᱴᱟᱜ ᱠᱚᱱᱟ ᱨᱮ ᱥᱮᱞᱮᱫ ᱢᱮᱱᱟᱜᱼᱟ᱾
{}} } } ᱨᱩᱠᱷᱤᱭᱟᱹ
ᱥᱟᱱᱟᱢ ᱠᱷᱚᱱ ᱵᱮᱥ ᱠᱟᱹᱢᱤ ᱫᱚ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ exposion lạgit̕ jạruṛ gạḍi jạruṛ ge lạgit̕ jạruṛ ge lạgit́ lạgit̕ jạruṛ ge lạṛha jạt kana , ᱚᱱᱟ ᱫᱚ 6′′ ᱟᱨ https ᱾ ᱜᱞᱩᱠᱚᱡᱽ ᱤᱞᱮᱠᱴᱨᱳᱰ ᱨᱮ ᱜᱞᱩᱠᱚᱡᱽ ᱜᱞᱩᱠᱚᱡᱽ ᱨᱮ ᱜᱞᱩᱠᱚᱡᱽ ᱞᱟᱹᱜᱤᱫ − − − − − ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱜᱞᱩᱠᱚᱡᱽ ᱨᱮ ᱵᱚᱫᱚᱞ ᱠᱟᱱᱟ ᱾



