ᱤᱧ ᱫᱚ ᱥᱟᱱᱟᱢ ᱥᱤᱞᱤᱱᱰᱟᱨ ᱨᱮᱭᱟᱜ ᱥᱤᱠᱲᱤ ᱠᱚ ᱩᱫᱩᱜ ᱟᱹᱧ ᱾

1. vircoption lạgit̕ kạmi lạgit̕, Stay official official kate , ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ ᱡᱚᱠᱷᱚᱱ ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱟᱨ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱞᱮᱠᱟ ᱵᱮᱵᱚᱦᱟᱨᱚᱜ ᱠᱟᱱᱟ᱾ ᱡᱩᱫᱤ ᱚᱱᱟ ᱠᱚ ᱫᱚ ᱵᱟᱝ ᱠᱟᱱᱟ, ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱵᱮᱵᱷᱟᱨ ᱢᱮ ᱾

2. In the installation process, the piston rod of the cylinder can not bear the eccentric load but the transverse load, and the load direction should be the same as the axis of the piston rod.

3. No matter which installation method is adopted, it is necessary to ensure that the cylinder body does not produce deformation, and the installation base of the cylinder should have a stable stiffness, and the connection between the load and the piston rod is not allowed to be welded by electric welding.

4. Adjustment of speed: Will first speed control valve of the opening in the middle of the adjusting range of location, then gradually adjust the output pressure of pressure reducing valve, when the cylinder is close to scheduled speed, can determine the working pressure, and then use speed control valve for fine-tuning, finally adjust the buffer of cylinder, adjust the needle valve buffer so get absorption of inertia of the piston, the ultimate speed and does not impact ᱥᱤᱞᱤᱱᱰᱟᱨ ᱫᱚ ᱢᱤᱫ ᱵᱚᱦᱚᱜ ᱞᱮᱠᱟ ᱧᱮᱞᱚᱜ ᱠᱟᱱᱟ ᱾